Gorenje Refrigerator Error Codes

On the occurrence of a malfunction of the refrigerator signal flashes the indicators on the front panel or codes of errors appear on the display of the freezer temperature indicators.

The error code flashes on the display alternates with the freezer temperature display. If errors occur, it is necessary to turn off the refrigerator, disconnecting it from the mains. After a while, turn it on again.

The temperature display in the freezer may display error codes:

E2 - the EP4 does not receive a signal from the temperature sensor in the freezer

E4 - the information on the temperature mode of the refrigerating chamber does not reach the control unit EP4 of the control panel

E6 - the unit EP4 does not receive signals from the temperature sensors of the refrigerator, which are responsible for the freezing and refrigerating compartments. The data transmission signal is broken. It is necessary to contact a specialist in the repair of refrigerators. Self-repair of such a breakdown can further exacerbate the malfunction.

Also, the faults can be detected by the light indicators, the flickering of which indicates various malfunctions in operation, which may require the replacement of the thermostat or the repair of the evaporator.

Indicator order number Indicator light order Description of the mode, the causes of the errors

3 Lit constantly Control system and compressor of the refrigerating chamber work normally

Flashing error or defect of the temperature sensor of the refrigerating chamber

4 Steady light The control system and the freezer compressor work normally

Flashing at 0.5 Hz Error or defect in the temperature sensor of the freezer

Flashing at 2 Hz Error or defect in non-volatile memory (EEPROM) of the E72 controller

Flashing at 5 Hz Error or defect in the temperature sensor of the freezer or non-volatile memory of the E72 controller

5 Steady On The "express-freeze" mode is activated

6 Flashing High temperature in the freezer