WHIRLPOOL Microwave Oven Error Codes

In this article, you will find the standard error codes and explanations for them, found in the microwave ovens Whirlpool.

 

Microwave furnaces Whirlpul proved to be quite reliable and a lot of functional equipment. But nothing lasts forever under the moon and like any other technology, this manufacturer has malfunctions. For the most common and not complex, the company has defined several designations of the control panels displayed on the display.

 

In the user's manual, descriptions of these codes are not found because they are designed primarily for the specialist of the service center, so that he can quickly identify all the possible causes that occurred during this or that malfunction.

 

Below you can find a list of errors and a description of the malfunction that triggered the output of a code

ERR0 - The temperature sensor in the convection system is not connected or short-circuited

 

ERR1 - The magnetron relay is faulty or the wires matching it are interchanged

 

ERR2 - Problem with the control board (as an option one of the buttons is clamped for more than one minute)

 

ERR3 - Temperature sensor error

 

ERR4 - Magnetron temperature sensor error

 

ERR5 - Impulse power supply error (problem with power board)

 

ERR6 - Weight sensor calibration failed

 

ERR7 - Moisture Sensor Error

 

ERR8 - microcontroller error

 

ERR9 - No parameters were set in the control panel before startup

 

ERRB - No signal from the weight sensor or it does not work correctly

 

ERRC - Temperature sensor defective

 

ERRD- The magnetron overtemperature protection has tripped