Vestel Refrigerator Error Codes

The technique of Vestel is quite reliable, its models are characterized by technological simplicity.

Some newer models are equipped with an automatic defrosting system for both cameras and an electronic display that allows you to adjust and monitor the operation of the refrigerator by displaying the temperature in each camera. The refrigerator of the new model can offer two new tuning modes: "leave", which, without unnecessary energy, keeps the products fresh when the refrigerator is not used; And Eco, which regulates the operation of the compressor with the rare use of technology. The device also has a system for displaying error messages.

The most common faults of Vestel refrigerators.

The appearance in the refrigerator of water,

Accumulation of a large amount of frost on the evaporator,

Malfunctions in the functioning of the scoreboard,

Malfunction of the motor-compressor,

Error E1 - indicates that the freezer sensor has failed. It is necessary to repair the sensor, but as a rule, it is much cheaper to replace it with a new one. However, without special education, this is not recommended.

Error E2 - indicates that the sensor-evaporator has most likely failed. It is necessary to replace the sensor-evaporator.

There are three indicators on the refrigerator's indicator panel: orange, green and red.

There are also some obvious signs that indicate a malfunction of the refrigerator. For example, insufficient cooling of products is a sign of leakage of refrigerant-freon. In this case, repairs of Westel refrigerators must be eliminated and a refueling device refilled. Also, the compressor may be faulty.

If the "snow" is visible on the evaporator, this is the result of the depressurization of the refrigerating compartment. In this case, to prevent serious damage, it is necessary to replace the sealing circuit to ensure complete insulation.